Catalog-Plarad

| EDNE | Products & Services

| www.plarad.de | 2

The Company 4 made in Germany Quality

5 The Company Professional bolting technology Since 1962 Maschinenfabrik Wagner and its brand „Plarad“ has been the benchmark for quality, innovation and reliability in the field of bolting technology. SME’s and large, globally engaged companies in various industries rely on our competence where tailor-made bolting solutions are concerned. Our customers benefit from our flexibility and our know-how, acquired continuously since the early 1960s. The new generation of Plarad bolting systems are thinner, more powerful and lighter than the preceding models. Due to continuous development of our products, Plarad is always a step ahead. We are driven by customer’s requirements as well as market demands. When developing new designs, we do not only focus on achieving a high level of quality, but at the same time we test extensively the function and handling features using our own testing devices. The result is a new generation of products for bolting technology which do not only technically fulfil the highest demands. With eight product lines, from manual torque multipliers through to completely automatic bolting systems, we can offer you the broadest product range in the market. You benefit from perfectly optimised tooling while all the products for your bolted joints come from a single source.

Bolt joint Head friction Setting Pitch of thread Lubrication applied Coating Clamping length Screw tension Friction in thread Distribution of load 1 2 3 Torque/Torque Angle Hydraulic pre-tensioning Torque-controlled tightening Initial tension (Fv) Depth Elastic range Superelastic range Plastic range Many physical characteristics affect and influence the final bolted joint. Bolting Technology 6

Via the hydraulic cylinder tensioning force is exerted on the bolt causing it to elongate. Our solutions Torque-controlled tightening l In the majority of cases where bolts are used, torque-controlled tightening is the method used to tighten. l With this method the friction on the thread and head of the bolt act as a precise pre-tensioning force, therefore the use of accurate tools is imperative. l Effectively the bolt can be tightened quicker. l This method is more practical and easy. l Light, compact tools can be used where space is limited. 1 Hydraulic Tensioning l As the nut is not rotated under load, there is no torsional load on the bolt. l After achieving the desired applied load, the nut can be tightened without causing stresses on it. The correct applied bolt load is therefore achieved. l Even different co-efficients (levels) of friction have no effect on the tensioning process. 2 Torque/torque-angle-controlled tightening l Torque/torque-angle-controlled tightening is more precise than purely torque-controlled tightening. l The defined amount of rotation of the bolt (torque angle) provides automatically and accurately the required pretension. l Control is achieved directly from the power pack, by means of microprocessor technology within the pump. l Higher quality bolting joints are achieved. l Results can be stored and used at a later date for documentation required in quality assurance processes. l The whole control process is achieved without the need of external sensors, hence no need for extra cables from the tool. 3 7 Bolting Technology

Nutrunners

DE1 & DE1plus the new generations The basic features of the DE1 and the DE1plus: l New gearbox – slimmer, shorter, lighter l New control system – for even more precise bolting results l New display with added features: comfortable operation and comprehensive information l PreSet function, 50 storage spaces l New: Optional with documentation up to 10000 bolting cases. Transmission via Wifi. Thanks to the innovative software, the DE1plus is equipped with additional features: l Torque mode l Angle mode l Torque/angle mode l Angle counting mode l Test mode The multi function display of the DE1plus The motor drive can rotate 360° Vibration free quiet drive Redesigned gearbox 9 Electric Nutrunners Torque limit Snug torque Angle Counted angle The motor drive can rotate 360° Type Performance range (Nm) DE1-10 / DE1plus-10 up to 1 000 DE1-20 / DE1plus-20 up to 2 000 DE1-30 / DE1plus-30 up to 3 000 DE1-36 / DE1plus-36 up to 3 600 DE1-48 / DE1plus-48 up to 4 800 DE1-80 / DE1plus-80 up to 8 000

Electronic torque preselection in 99 fine gradations/digital display Electrical motor (handle) freely rotates on the gearbox aiding easy operation Two-speed gearbox Quiet operation, impact and vibration free, compliant with HAVS legislation Ergonomically designed for ease of handling DEA/DEM automatic/manually operated Torque range up to 12 000 Nm l For continuous use in assembly, repair and production l Plarad DEM with manual and Plarad DEA with automatic 2-speed gearbox l The low-vibration technology protects the user’s muscles and joints, effectively preventing the onset of HAVS (hand-arm-vibration syndrome) l The light weight and sophisticated ergonomic profile enable optimal handling Type Performance range (Nm) DEA/DEM 65 up to 6 500 DEA/DEM 80 up to 8 000 DEA/DEM 120 up to 12 000 Electric Nutrunners 10

DE accessories DE1-W with angle drive: easy to use even in otherwise inaccessible places thanks to its low height. The electric motor and handle freely rotate on the gearbox. Various extensions are available for deep fastenings and tight spaces. The motor drive can rotate 360° The offset gear makes it possible to move the wrench down long threads for nut sizes up to AF 150 mm. 11 Electric Nutrunners

DA2 Battery Nutrunner Power Settings Optimised gear Ergonomically designed for ease of handling Brushless motor Continuously active battery charge indicator Battery safety cell technology Automatic locking and release Redefined mobile bolting As soon as the desired set torque value is acquired the unit automatically stops, it is also immediately ready for the next bolt tightening etc. The continually active 2 step LED display of the battery charge prevents inaccurate torque tightenings when the capacity of the battery is too low. The operation trigger is not variable but binary – thus preventing an inaccurate torque being applied, especially useful during extended operation or when wearing gloves. Battery Nutrunners 12 Type Performance range (Nm) DA2-05 130 - 550 DA2-10 180 - 1000 DA2-20 220 - 2000 DA2-30 330 - 3000 DA2-36 380 - 3600 DA2-48 500 - 4800 DA2-80 900 - 8000

Reliable Plarad quality up to 4800 Nm l Ergonomically optimised handling l Even slimmer and lighter than its predecessor l Automatic locking l Integrated feature that allows free rotation of the motor and handle l Active battery charge indicator l Available in 7 sizes up to 8000 Nm l Optional: Diagnostic Setting Software (DSS) to lock the power settings and provide tool diagnosis Includes two 6.0 Ah lithium ion battery packs Includes a battery powered LED torch 13 Battery Nutrunners Track construction battery nutrunner DA1 Track construction - easier than ever l Mobile and suited for universal use l Low weight l Easy handling l Powerful and precise l Active battery charge indicator prevents inaccurate torque tightening due to low battery capacity l Working lamps can be placed in any position l Including two 6.0 Ah Li-Ion batteries l Including quick charger (230 V, 50/60 Hz or US version 110 V, 50/60 Hz)

DP1 the new generation l Shorter and slimmer than the previous model l 5 models covering a torque range from 125 – 3 600 Nm l Vibration reducing technology protects the users muscles and joints during continuous operation in assembly/maintanence and production environments l Lightweight and ergonomic making the tool easy to use l Pneumatic drive rotates 360° on the gearbox Type Performance range (Nm) DP1-05 up to 500 DP1-10 up to 1 000 DP1-20 up to 2 000 DP1-30 up to 3 000 DP1-36 up to 3 600 15 Pneumatic Nutrunners

Fine adjustment is achieved via a pressure regulation unit Up to 12,000 Nm available on request. Type Performance range (Nm) DPA/DPM 47 up to 4 700 DPA/DPM 65 up to 6 500 DPA/DPM 80 up to 8 000 Two-speed gearbox Pneumatic motor (handle) freely rotates on the gearbox aiding easy operation Quiet operation, impact and vibration free, compliant with HAVS legislation. Ergonomically designed for ease of handling Torque range up to 12 000 Nm l For continuous use in assembly, maintenance and production l Plarad pneumatic nutrunners are specifically designed for a variety of tasks, including “Ex” environments prevalent in the oil, gas, and mining industry l Plarad DPM with manual 2-speed gearbox and Plarad DPA with automatic two-speed gearbox l The low-vibration technology protects the user’s muscles and joints, effectively preventing the development of HAVS (hand-arm-vibration syndrome) l Their extremely light weight and sophisticated ergonomic profile enables ease of use DPA/DPM automatic/manually operated Available also as ATEX compliant version for the oil- and gas industry (II 2GD c IIB T5) as well as mining industry (I M2 c) Pneumatic Nutrunners 16

DP accessories The offset gear makes it possible to move the wrench down long threads for nut sizes of up to AF 150 mm. Various extensions are available for deep fastenings and tight spaces. DP with angle drive: easy to use even in otherwise inaccessible places thanks to its low height. The pneumatic motor and handle freely rotate on the gearbox. 17 Pneumatic Nutrunners The motor drive can rotate 360°

Hydraulic Power Packs

Hydraulic Power Packs for every bolting situation Our robust and long-lived hydraulic power packs are distinguished by a constant volume of oil (litres) up to the final pressure of 800 bar and have proven their mettle in heavy continuous use. From light-weight standard versions via microprocessor-controlled, fully automatic designs through to special power packs – Plarad has the correct power pack for every need, electric or pneumatic drive. 19 Hydraulic Power Packs IQ-VAX 2 WZ X32 IQ-VAX 3,5 DM-DW X32 IQ-VAX 2 Z-X32 110V XB 1 XB 2 Z XB 2 X2 P-Z TAX IQ VAX 2 WZ Dual

Equipment High-Tech l Fully automatic l Documentation l Torque/angle method l Dual Power Pack Basic l Compact, small, light-weight and economical Fast l More bolts can be tightened in the same amount of time: Plarad products are up to 3 times faster than other products. Safe l The Plarad documentation system makes it possible to record and illustrate the results of every bolted joint. For this reason the documen- tation is very useful in the field of product liability. Reliable l Accurate, safe results as the application is controlled and monitored completely automatically by an internal microprocessor. Plarad Power Packs Other Power Packs Power Pack Overview electric Electric Hydraulic Power Packs 20

Fast operation XB-VAX 2-X32 XB-VAX 2-Z-X32 XB-VAX 3,5-X32 Fully automatic No documentation XB 1 XB 2 XB 1-Z XB 2-Z XB 3,5 XB 3,5-Z Manual IQ-VAX 1-Z-X32 IQ-VAX 2-Z-X32 IQ-VAX 3,5-Z-X32 Fully automatic Including documentation Special models e.g. with torque/angle feature IQ-VAX 2-X32 (torque/angle) IQ-VAX 3,5-X32 (torque/angle) TAX 1-1500-X32 (Tensioners) IQ-VAX 2-Z-D 1500-X32 (Dual Power electric) IQ-VAX 3,5-Z-D 1500-X32 (Dual Power electric) Can be operated almost continuously l The power packs do not over- heat thanks to their special oil-filled motor design. The oil tank is part of the motor itself and no other tank is necessary. The motor, the pump unit and the oil are all cooled at the same time. Lightweight l Optimal power to weight ratio. The oil-filled electrical motor technology guarantees optimum weight and maximum output. It runs and runs and runs! l Innovative, patented techno- logies and design features, plus the use of high-quality materials ensure the pump has an extremely long lifespan. 21 Electric Hydraulic Power Packs

Power Packs high-tech models Our rugged and durable power packs are characterised by the constant volume they output right up to their pressure limits, and have proved themselves through their long life in the toughest applications. The oil-filled motor prevents overheating. The design also ensures optimum performance to weight ratio. IQ-VAX l Fully automatic for accurate, reliable bolting joints l Documentation l Instrumentation and control systems l Torque-angle method 23 Electric Hydraulic Power Packs

Fully automatic VAX technology keeps users perfectly safe Each individual bolting case (tightening – loosening) is controlled via the pump's microprocessor control unit utilising different processes Low noise while operating Pressure indication displayed, assessment of the bolting case via a status indicator Power Pack Flow rate Weight * IQ-VAX 3,5-X32 3.5 l/min 35 kg IQ-VAX 1-Z-X32 5.4 / 0.8 l/min 26 kg IQ-VAX 2-Z-X32 8.0 / 1.2 l/min 32 kg IQ-VAX 3,5-Z-X32 13.2 / 3.0 l/min 36 kg Extracts of the specifications * ready for use Rugged cage which protects the unit, even on building sites Electric Hydraulic Power Packs 24

VAX – Genuine full automation function l Straight to work at the touch of a button: the VAX automatic controls and finishes the bolted joint automatically and accurately, even when handling multiple bolts, as well as indi- cating progress to the operator via the remote-control. l Pressure is taken off the operator, hence errors are eliminated. Synchronised operation l Synchronised operation using two or more units (MX-EC or FSX). l The automatic function ensures that synchronised bolted joints are handled quickly and reliably, ensuring an optimal seal. Documentation l The Plarad “Documentation” add-on saves all torque or torque angles conducted into the control unit. l Once uploaded to a computer, the bolting data can be used for traceability purposes on each bolt joint. Multiple bolting technologies l The torque/angle function, for example, means that differing friction coefficients of bolts no longer play a role. The required tightening torque will always be achieved. Optimal storage in a professional Plarad storage trolley Optional accessories 25 Electric Hydraulic Power Packs There is an extensive range of accessories, e.g. auxiliary oil tanks, to extend the unit’s range of applications Hydraulic couplings – adaptors and hoses are available in many sizes etc.

Power Packs setting high standards l XB 1 The lightweight design of the XB 1 makes this power pack ideal for mobile service applications. l XB 2 The all-rounder in the XB range is the XB 2, famous for its high speed. l XB 3,5 As the quickest power pack the XB 3,5 is a powerful package particularly suitable for complex bolting jobs. XB 1 for mobile service work 27 Electric Hydraulic Power Packs

Rugged industrial cage for tough environments Improved valve technology Outward-facing oil filters (on XB 1 and XB 3,5) and maintenance friendly design, for easier maintenance One or more hydraulic tools can be used with one or twin hose technology The main valve is within a protected non exposed area on the pump Guide to wind the cables around XB 2 for universal use Electric Hydraulic Power Packs 28

Power Pack Flow rate Weight* XB 1 0.8 l/min 20 kg XB 2 1.2 l/min 29 kg XB 3,5 3.5 l/min 33 kg XB 1-Z 5.4 / 0.8 l/min 24 kg XB 2-Z 8.0 / 1.2 l/min 31 kg XB 3,5-Z 13.2 / 3.0 l/min 35 kg XB-VAX 2 1.2 l/min 32 kg XB-VAX 2-Z X32 8.0 / 1.2 l/min 32 kg XB-VAX 3,5 3.5 l/min 35 kg Extract from technical data (values apply to 230 V/50 Hz or 400 V/50 Hz versions. (other voltages are available), e.g. 110 V. * ready for use XB 3,5 for use in manufacturing plants 29 Electric Hydraulic Power Packs

31 Electric Hydraulic Power Packs TAX the pump for tensioners l Dedicated pump specially for tensioning applications up to 1500 bar (optional to 2100 bar) l Pressure indication in the display screen l Compactly built with special principles being utilised to build up the pressure Guide to wind the cables around Power Pack Flow rate Weight* TAX 1-1500-X32 0.4 l/min (1500 bar) 31 kg TAX 2-1500-X32 0.6 l/min (1500 bar) 40 kg TAX 3,5-1500-X32 1.0 l/min (1500 bar) 40 kg Extracts of the specifications * ready for use

Dual Power Hydraulic Torque Tools Tensioners 1500 bar (optional up to 2100 bar) 800 bar The IQ Dual Power Pack can power both hydraulic torque tools and hydraulic tensioners. Power Pack Flow rate Weight * IQ-VAX 2-Z- 8.0 / 1.2 l/min (at 800 bar) 40 kg D 1500-X32 8.0 / 0.4 l/min (at 1500 bar) IQ-VAX 3,5-Z- 13.2 / 3.0 l/min (at 800 bar) 42 kg D 1500-X32 13.2 / 1.0 l/min (at 1500 bar) Extracts of the specifications * ready for use Electric Hydraulic Power Packs 32

Plarad IQ Power Packs tensioner mode monitors the pressure and pump as required, ensuring that the required tension is achieved. When initially tensioning, there is a risk that oil pressure decreases due to the settling of the object during the actual stretching process or due to stretching of the attached hydraulic hoses. Controlled tensioning force in tensioner mode Time Hydraulic power pack without tensioner mode Hydraulic power pack with tensioner mode Time Pressure Pressure Nominal pressure Nominal pressure Solution Actual As well as a variety of bolting techniques and lifting processes in 800 bar mode, the Dual Power VAX unit can also be used for tensioning applications up to 1500 bar (optional up to 2100 bar). This universal hydraulic Power Pack saves you having to invest in additional high-pressure units. l 2-in-1, one less unit to buy l Fully automatic pumping of hydraulic tensioners l Automatic limit-stop l Pumping performance accross the range l User-friendly – a remote control with identical functions. Users can easily familiarise themselves with the operation of the units easily l All of the upgrades and enhancements on conventional IQ Power Packs are also available for the Dual Power 33 Electric Hydraulic Power Packs

X 2-P-Z Pneumatic Hydraulic Power Packs Just like our electrically powered hydraulic units, our pneumatic hydraulic power packs are characterised by their ruggedness, long life and their constant throughput right up to their pressure limits. The pneumatic motor is integrated into the oil tank, preventing seizure while simultaneously cooling the hydraulic fluid. IQ-VAX 2-P-Z 35 Pneumatic Hydraulic Power Packs

The first pneumatic VAX unit: The new, fully automatic pneumatic power pack uses the latest microprocessor technology. This eliminates user errors since operators simply start a fully automatic, controlled procedure at the push of a button. The machinery shuts off automatically when the required torque is achieved and informs the operator via the remote control. IQ VAX pneumatic For the full functionality of IQ technology IQ-VAX 2-P-Z Extracts of the specifications * ready for use Power Pack Flow rate Weight* X 1-P 0.8 l/min 24 kg X 2-P 1.6 l/min 31 kg X 2-P-Z 7.0 / 1.6 l/min 32 kg X 2-P-Z ATEX 7.0 / 1.6 l/min 32 kg IQ-VAX 2-P-Z 7.0 / 1.6 l/min 35 kg Pneumatic Hydraulic Power Packs 36

X 2 P-Z ATEX: Approved for operation in Zone 2G. Certified for use in areas containing materials with a minimum flame point of 0.082 mJ ATEX approved X 2-P-Z 37 Pneumatic Hydraulic Power Packs

HP Hydraulic Pump light and handy l For occasional use l Ideal for tensioners l Extremely light l High throughput l More than 50% lighter than conventional steel pumps l High throughput thanks to clever design l Low setting down to 385 N l Pressure limiting valve factory-provided adjustable l Carrying handle and stabilising feet l Available with two sizes of tank, 2 l and 4 l l Available in 800-bar and 1600-bar models Plarad’s manual hydraulic pumps are characterised by their high performance and low weight. The use of very rigid light metal saves more than 50% in weight compared to conventional steel pumps. 35% less power required to achieve mechanical leverage, extremely low weight, and considerably higher pumping performance than conventional products, means that HP Power Packs are a welcome tool for everyday use in the workplace. Plarad HP Power Packs are also available in a variety of sizes. 39 Manual Hydraulic Pumps

Hydraulic Torque Wrenches

l Long-lasting Plarad quality l Fast operation thanks to optimum harmonisation with Plarad power packs l Safety relief valve l SQS-high-pressure safety cylinder – in case of housing failure – no leakage l Easy servicing l Compact dimensions l Fine-toothed ratchet system offers high torque precision and prevents jamming l Also available in an ATEX version (II 2 G ck II B T4) for Zone 1G l Internationally patented technology MSX/MX-EC powerful and variable Continuous rotation in every stroke position! No jamming! 41 Hydraulic Torque Wrenches

Available with adjustable handle 360° rotatable hose connection, with swivel option Also available in a singlehose version – for even easier handling and positioning The fast-locking device allows quick and simple reversing of the tool and socket Type Square socket adapters Torque range (Nm) MX-EC 10 TS 3/4“ 100 - 1 000 MX-EC 20 TS 1“ and 3/4“ 210 - 2 100 MX-EC 45 TS 1“ 450 - 4 500 MX-EC 75 TS 11/2“ 750 - 7 500 MX-EC 95 TS 11/2“ 950 - 9 500 MX-EC 120 TS 11/2“ 1 200 - 12 000 MX-EC 155 TS 11/2“ 1 550 - 15 500 MX-EC 200 TS 21/2“ 2 000 - 20 500 MSX 250 TS 21/2“ 2 500 - 25 000 MSX 400 TS 21/2“ 4 000 - 40 000 MSX 650 TS 31/2“ 6 500 - 65 000 Hydraulic Torque Wrenches 42

The reaction arm can be rotated quickly and easily through 360°. Extremely slim, lightweight and high-strength aluminium housing. SQS safety cylinder made of high-strength material allows high pressures in a lightweight housing. Long-lasting fine-toothed ratchet system. Full stroke movement is not always essential. The connection between lever and ratchet guarantees optimum transfer of the torque generated. Lever piston system – in the case of sudden loosening, the piston separates from the lever and reconnects automatically. No part is therefore in danger of being broken. Integrated release shock absorber protects the housing from sudden loosening impact damage. Pressure safety valve. Safety ratchet – prevents unintended unlocking of the reaction arm. 43 Hydraulic Torque Wrenches

Reduction of height and weight through the use of one-piece splined safety sockets. Splined safety hex inserts in a variety of sizes. Standard square drive sockets are available in all dimensions and for all across flats sizes. Long socket Double hexagonal socket Accessories for MSX/MX-EC Hydraulic Torque Wrenches 44

l Fast operation thanks to optimum harmonisation with Plarad power packs l Safety relief valve l SQS-high-pressure safety cylinder – in case of housing fraction no leakage l Easy servicing l Compact dimensions l Fine-toothed ratchet system offers high torque precision and prevents jamming l Also available in an ATEX version (II 2 G ck II B T4) for Zone 1G l ANSI/API-compatible version available l Internationally patented technology FSX slim and precise 47 Hydraulic Torque Wrenches Continuous rotation in every stroke position! No jamming!

360° rotatable hose connection, with swivel option Also available in an ANSI version for the oil & gas industry Available with adjustable handle HSX ratchet head SX drive unit FSX combination Ratchet heads (AF) Torque range (Nm) SX-EC 1 / HSX 27 - 41 100 - 1 000 SX-EC 2 / HSX 20 - 70 250 - 2 500 SX-EC 5 / HSX 27 - 85 500 - 5 500 SX-EC 8 / HSX 46 - 80 800 - 8 500 SX-EC 12 / HSX 50 - 120 1 200 - 12 000 SX-EC 20 / HSX 55 - 145 2 000 - 20 000 SX 30 TST / HSX 95 - 145 3 000 - 30 000 SX 45 TST / HSX 120 - 185 4 500 - 45 000 Hydraulic Torque Wrenches 48

Also available in single hose version - for even easier handling Extremely slim profile, lightweight high-strength aluminium housing. SQS safety cylinder made of high-strength material allows high pressures in a lightweight housing Long-lasting fine-toothed ratchet system. Full stroke movement is not essential. The connection between lever and ratchet guarantees optimum transfer of the torque generated. Lever piston system – in the case of sudden loosening, the piston separates from the lever and reconnects automatically. No part is therefore in danger of being broken. Integrated release shock absorber protects the housing from sudden loosening impact damage. Pressure safety valve 49 Hydraulic Torque Wrenches

In/out sockets are available in all dimensions and for all wrench sizes. In exceptional cases, bespoke reaction arms can be designed to match your particular application, ensuring safe and optimum use of the reaction arm against a surface. Interchangeable sockets in different sizes can be quickly changed. Accessories for FSX Hydraulic Torque Wrenches 50

Ratchet heads (up to 105 mm) with exchangeable inserts Socket fittings up to 150 mm, also available open and open-able versions K-series the universal tool for confined spaces Type Head Performance sizes (mm) range (Nm) K 30 TF 24 - 90 300 - 3 000 K 60 TF 24 - 90 660 - 6 600 K 150 TF 27 - 110 1100 - 11000 K 200 TF 60 - 135 2 000 - 20 000 K 300 TF 80 - 150 3 000 - 30 000 53 Hydraulic Torque Wrenches

l For tightening and loosening large, heavy bolted joints l Optimised for use in confined spaces where conventional hydraulic wrenches do not fit l The space required by a ring spanner is enough room for the HPR to operate Various ring spanner attachments and the ratchet heads can be changed quickly and easily. Power Performance Max. size, Max. size, Weight unit range metric (AF) imperial (AF) RE 500 5 000 to 185 mm 7 1/4" 34 kg 50 000 Nm RE 1000 10 000 to 230 mm 9 1/8" 45 kg 100 000 Nm RE 1500 15 000 to 320 mm 12" 76 kg 150 000 Nm CTK 35 EFS Hydraulic Power Pack HPR up to 150000 Nm 55 Hydraulic Torque Wrenches

X 2-P-Z Pneumatic Power Pack II 2G ck IIB T4 -10°C≤Ta≤+50°C FSX Hydraulic Torque Wrench II 2G ck IIB T4 -10°C≤Ta≤+50°C MX-EC Hydraulic Torque Wrench II 2G ck IIB T4 -10°C≤Ta≤+50°C Terminology conforms to EU machine guidelines 98/37/EU and 94/9 EU ATEX products Nutrunner (pneumatic) for oil and gas industries II 2GD c IIB T5 -10°C≤Ta≤+50°C DP Nutrunner (pneumatic) for mining I M2 c -10°C≤Ta≤+50°C 57 ATEX

Hydraulic Tensioners

l Bolted joint assembly and disassembly without inducing torsional stress in the bolt l Applied load precisely adjustable l Individual adjustment for every bolting need l Available in single stage and multi stage versions l 1500 bar maximum operating pressure l Available in a range of sizes 59 Hydraulic Tensioners PSE & PSD single and multistage cylinders

PSE single stage Hydraulic Tensioners 60 Its flat design makes the single stage tensioner particularly advantageous in axially restricted spaces. The knurled attachment additionally included will also ensure successful tensioner application with bolt protrusions of excessive length. Furthermore the PSE also includes all market relevant features of the PSD (see cross sectional 3d model). Handle Type Maximum force applied load (kN) AF (mm) PSE 24-305 305 36 PSE 30-482 482 46 PSE 36-681 681 55 PSE 42-980 980 65 PSE 48-1235 1 235 75 PSE 52-1458 1 458 80 PSE 56-1676 1 676 85 PSE 64-2259 2 259 95 Other sizes and dimensions on request. Hose coupling can be positioned for optimum use Spacer rings and washers for different bolting cases Knurled attachment for long bolt protrusions Standard attachment

PSD two stage The two stage hydraulic tensioner PSD enables screw joint assembly and disassembly without torsional stress for the bolt. The pre-tensioning power is precisely adjustable. 61 Hydraulic Tensioners Automatic piston return Swift operation: The puller is automatically returned to its original position once the pressure has been released. Cycle counter The cycle counter indicates number of cycles performed and will consequently indicate the maximum cycle service point, thus avoiding damage and failures via preventive maintenance. Stroke limiter – mechanical Ultimate safety: The mechanical end stop prevents the over extension of the piston (even under maximum load). Free Rotating Bridge Exceptional handling: Straightforward alignment, independent of the bolt configuration. Gearbox Unique ease of use: The nut can be turned swiftly and with perfect ease using a ratchet or a torque wrench that is driven by a gear drive (maximum input torque: < M36=40 Nm, > M36=80 Nm). Rotating socket – spring-loaded Prevention of installation damage during the positioning of the tensioner: The spring affords the rotating socket axial flexibility. Stainless steel handle Safety: Protection of the hose couplings against damage. Optimal grip and dexterity provided by the detachable handle of the tensioner. Safety indicator – green (optional) Safe controlled operation: Verification of sufficient engagement of the bolt/stud. Maximum stroke indicator Optical safety: Visual indication of maximum stroke (max distance piston can move out of the tensioner body). Supporting surface – optimized Outstanding versatility in any environment:The tensioner is especially well suited for use in tight spaces thanks to its optimal shape. Type Maximum force applied load (kN) AF (mm) PSD 30-471 471 46 PSD 33-581 581 50 PSD 36-678 678 55 PSD 39-808 808 60 PSD 42-937 937 65 PSD 45-1089 1 089 70 PSD 48-1278 1 278 75 PSD 56-1695 1 695 85 PSD 64-2233 2 233 95 PSD 72-2825 2 825 105 Other sizes and dimensions on request.

Manual Torque Multipliers

Flexibility thanks to height-adjustable reaction arm l Manually operated torque multiplier l Ideal for use with no external power supply l Available for use anywhere and at any time Compatible torque wrenches XVK Single stage torque multiplier XVR Multi stage torque multiplier with reversing safety mechanism ensures extra safety for users PH 36 Z (60 - 360 Nm) PH 50 Z (200 - 500 Nm) XVR/XVK All weights are without reaction arm/subject to amendment. Torque Height ø Performance Weight multiplier (mm) (mm) range (Nm) (kg) XVK 15 172 81 220 - 1 700 2.6 XVR 25 302 81 440 - 2 300 5.2 XVR 35 273 81 510 - 3 600 5.0 XVR 40 238 95 560 - 4 000 6.1 XVR 65 244 114 820 - 6 200 8.4 XVR 70 302 128 980 - 6 800 11.4 XVR 90 300 172 1 780 - 8 600 21.8 XVR D 45 310 128 1 000 - 10100 16.0 63 Manual Torque Multipliers

Trolley for hydraulic power packs – for mobility in plants and workshops Aluminum frame, 2 integrated handles, lockable quick-lock, rollers with solid rubber tires and roller bearings, brake and caster wheels Assortment of hoses and coupling adapters Plarad hoses with a fourfold safety factor up to 800 bar (bursting pressure 3200 bar) General accessories Accessories 64

Various sockets and fittings Lubricants Various reaction arms Valve wheel driver for valves 65 Accessories

The PH test system, used with the GMV 2, is the ideal combination for testing and setting up hydraulic tools. Combining the DRT reaction torque sensor with the GMV 2 enables static testing of impact tools, electric torque tools and other equipment of various designs. The microprocessor controlled GMV 2 unit is our key test instrument. Used in conjunction with a transducer, it enables precision measurement of torque while bolts are being done up. The values can be saved, along with the date and time, and can then be printed out by the instrument itself or uploaded to a PC for further evaluation. Equipment testing Bolting joints can be evaluated on a PC GMV 2 & PH torque measuring device Checking bolting joints Measurement Instrumentation 66

TC1 mobile measuring unit The TC1 measuring unit is an innovation in the field of mobile measuring equipment. It measures the applied torque, and hence the bolting process, directly where it happens. The system works wirelessly in the bolting process and can simply be attached to the nutrunner. l Measures the applied torque directly at the point of application l Measuring range up to 5500 Nm l Torque is shown in the sensor display l Acoustic warning signal if the defined tolerance is exceeded l An LED display provides information about the torque result l Integrated memory for 250 values l Transfer and analysis to the PC l Appliances are compatible with the current Plarad nutrunner range and virtually maintenance-free l Including transport box, Data-Trans software, power cable and USB cable 67 Measurement Instrumentation Torque Control Software l Documentation from: Screw connection date, time, OK/NO OK result l Storage of screw connection data l Evaluation/statistics/archive l Optimised documentation and process security l Quality assurance guarantee Type Measurement range (Nm) Square drive Spline teeth quantity Weight (kg) TC1 - 11 110 - 1 100 3/4“ 26 2.60 TC1 - 31 310 - 3 100 1“ 45 4.80 TC1 - 41 410 - 4 100 1“ 26 2.70 TC1 - 55 550 - 5 500 11/2“ 45 5.00

Consultation and assistance for use of equipment in Russia Plarad support during the construction of a wind plant in China Demonstration of equipment by Plarad employees in Italy

Product advice from our specialists on-site Comprehensive service Test equipment and product demonstrations available Sustained long-term success will only be possible if you are able to respond to market and customer requirements quickly. With over 50 years’ worth of bolting expertise and the broadest product range, we can offer you the most economical solution. In close cooperation with our clients, we develop tailor-made tools that are perfectly customised to their respective requirements. Extensive support is meanwhile an integral part of our service. This is because we will accompany you before, during and after the project phase. We are actively involved in various panels and standardisation committees. This enables the accommodation of the latest changes in standards and of future bolting requirements in our competent service portfolio. l Project Consulting l Bolting Case Analysis l 3D-CAD Analysis l Product Demonstrations l Trainings/Instructions/Seminars l Measuring/Testing/Calibrating l Repair and Spare Part Service l 24-hour Service l Renting/Leasing/Financing 69 Services

We pass on our knowledge We continually offer advanced training within the organisation to enhance the know-how of our employees. We cooperate with PSA Sicherheitstechnik GmbH & Co. KG in operations worldwide, providing detailed support for training and safety instruction (for example, working at height, where this is a risk of falling), both for our own employees and for yours. Training and seminars for your employees l Maintenance and repair of torque tools: l Relevant maintenance l Fault diagnosis l Repairs l Adjustment, calibration and testing l User training: l Basic bolt fitting and technology l Safety aspects l Handling and positioning torque tools l Equipment settings l Training courses in colleges and academies: l e.g. basic bolting techniques 71 Services

E.g. hand-drawn sketch, with the aid of our bolting survey or as a CAD file. We will use your information to create a 3D model on our own CAD system. This enables us to recommend the optimum tools for your needs. Where appropriate, we can customise a bolting system for your individual needs. You will receive our recommended solution in the form of a printout and a 3D animation (use “Autodesk” dwf viewer). Our wide range of products enables us to find the most economical solution for you. Give us the data on your bolting joints in whatever format you want: 3D CAD analysis Services 72

Special solutions XB 1 Hydraulic power pack with protective shields and an extra manometer Offset drive For nutrunner when space is limited (e.g. plate heat exchangers) Speedy Pneumatic speedy nutrunner: fast operation in low torque applications Threaded column connection mechanism for pre-stressed concrete reinforcement 73 Services

Our support service includes financial analysis of your project, instruction on the operation of the equipment, loan equipment, equipment calibration, maintenance and more. We check your bolting needs by means of precise measurement of torque while bolts are being tightened.

24/7 support and service Plarad headquarter Plarad’s foreign subsidiaries Plarad staff Plarad distributors l l l l www.plarad.de | info@plarad.de | +49 (0) 172 461 42 79 l Economic and technical security, thanks to expert consultation anywhere in the world. l We offer provision for service and maintenance, a reliable supply of spares as well as calibration services. l One call is enough! Our 24/7-service team will provide clear quick no-nonsense support. Competent expert help available throughout the world, at any time 75 Services

Reproduction and copying of this volume, in whole or in part, is permissible only with express written permission. Subject to amendment. We take no responsibility for printing errors or inaccurate information. Version: 2020/01/08 | pA 67202 Maschinenfabrik Wagner GmbH & Co. KG Birrenbachshöhe · 53804 Much · Germany Phone national: +49 (0)2245 62-0 Fax national: +49 (0)2245 62-66 Phone international: +49 (0)2245 62-10 Fax international: +49 (0)2245 62-22 info@plarad.de · www.plarad.de China PLARAD Bolting Technology (Beijing) Co., Ltd Block D, Building No. 3, Yard No. 31 Guangqu Road · Chaoyang District CN - Beijing 100022, P.R.C Phone: +86 (0)10 872 160 01-0 Fax: +86 (0)10 872 160 02 E-mail: info-china@plarad.com Italy Plarad Italy Srl Via della Vecchia Chimica, 10 20070 Cerro al Lambro (MI) Phone: +39 02 983 29 54 Fax: +39 02 98 11 91 73 E-mail: italia@plarad.com Turkey Plarad - Tork Anahtarları ve Gerdirme Sistemleri San. Dış. Tic. Ltd. Şti. Tekstilkent Ticaret Merkezi A2 Blok, Kat: Giriş D: 22, Oruçreis Mah. Barbaros Cad. 34220 Esenler, Istanbul Phone: +90 (0)212 659 77 76 Fax: +90 (0)212 659 77 81 E-mail: plarad-tork@plarad.com UK Plarad UK Ltd. Parkside Business centre, Unit 4 58/62 Walpole Road, Bromley, BR2 9SF, London Phone: +44 (0) 845 643 69 78 Fax: +44 (0) 1294 44 30 60 Mobile: +44 (0) 777-153 30 78 E-mail: UK@plarad.com Overseas subsidiary companies: ... a successful connection!

Made with FlippingBook

RkJQdWJsaXNoZXIy MTU4ODc4MA==